Interested in photography? At matthughesphoto.com you will find all the information about Troels Gravesen Photography and much more about photography.
DIY Loudspeaker Projects Troels Gravesen
- http://www.troelsgravesen.dk/
- Troels Gravesen, Denmark . DIY Loudspeakers. Click link below to go to: DIY Loudspeakers. by Troels Gravesen, Denmark ...
DIY-Loudspeakers - Troels Gravesen
- http://www.troelsgravesen.dk/Diy_Loudspeaker_Projects.htm
- 2-way floorstanders. ScanSpeak Discovery MTM Bookshelf speakers. BOOKSHELF-3WC, 22W/8534-G00 + 12W/8524-G00 + D2608/913000. ScanSpeak Center Speakers
Studio-101 - Troels Gravesen
- http://troelsgravesen.dk/Studio101.htm
- Studio-101. This project has been on hold much too long, but here it finally is. A modest sized monitor from ScanSpeak 18W/8542-00 + SEAS 27TFFC. Some may find resemblance to a well-known commercial design, but the crossover here is …
Ekta-25 - Troels Gravesen
- http://www.troelsgravesen.dk/Ekta-25.htm
- CABINET BACK TO INDEX. Cabinets were made from 20 mm Baltic birch and front panels from 19 mm HDF. You can use 19 mm MDF throughout. And you can make the front panel like the Ekta mkII if you like the look of Baltic birch. I …
CNO-4 - Troels Gravesen
- http://www.troelsgravesen.dk/CNO-4.htm
- SEAS CNO-4. CNO-4 is featuring a new 6" driver from SEAS, W18NX003, an up-date of my beloved Nextel coated driver, but here refined with new and improved magnet systems and titanium voice coil formers. The center pole piece has a …
Purifi-6661 - Troels Gravesen
- http://www.troelsgravesen.dk/Purifi-6661.htm
- The PTT6.5 W 08-NFA-01 "only" has some Xmax of +/-5.9 mm compared to the +/- 10 mm of the X model. Having a twin-bass setup, this is more than enough. In addition to this a little higher impedance making it ideal for a double-driver set-up for bass. The W also features a little higher sensitivity compared to the X model.
Revelator-851 - Troels Gravesen
- http://www.troelsgravesen.dk/Revelator-851.htm
- Actually the tweeter is an Illuminator, but Revelator has the upper hand here, so Revelator-851 it is. The 4 Ohms Revelator 8" bass allows a decent system sensitivity combined with a powerful bass from a modest cabinet. The 15M/8631G00, the 8 Ohms version, is a recent favorite doing so well in a custom design, for which it was created, that I ...
#troelsgravesen Instagram posts (photos and videos)
- https://www.sweetagram.com/tag/troelsgravesen
- Nuevo proyecto en proceso de fabricación. Diseño TQWT mkIII de Troels Gravesen. Caja en MDF de 22mm enchapado en guayubira. @pablogarciafuster #garciafusteramoblamientos #tqwtmklll #troelsgravesen #carpinteriadeaudio #carpinteriaamedida
Any Experience with Troels Gravesen Designs??? | diyAudio
- https://www.diyaudio.com/community/threads/any-experience-with-troels-gravesen-designs.86890/
- 2006-09-21 5:29 pm. #3. Troels has a very nice website with lots of pictures, good documentation, with many many projects to try. Many are not optimised to the n-th degree, but is still better than many other projects out there in free-to-DIY land. You could do a lot worse.
Tips and ideas Copyright 2012-14
- http://troelsgravesen.dk/tips.htm
- Rotate the coil until it fits the disc and mark the position of the coil relative to the disc with a marker. Add a ring of superfix on the coil or disc and press gently the coil into place. Leave for 3-5 hours to settle. This will leave the coil in perfect condition - and maintain its correct inductance.
Found information about Troels Gravesen Photography? We have a lot more interesting things about photography. Look at similar pages for example.